· Wear protective measures (lab coats, rubber gloves, masks) in time
· Do not eat, smoke or drink in the lab
· Be sure to pay attention to the precautions and signs on each piece of equipment
· Closed-toe shoes and shorts cannot be worn in the lab
· Remember the emergency security phone number
· You can't experiment without any other people
Clean bench
· The tools used need to be disinfected with more than 75% alcohol
· Turn on the ventilator before use
· Turn on the light when in use
Cellular room
· Be sure to wear masks, gloves, protective helmets, and protective clothing
· The bacterial strains we used in this project is Escherichia coli DH5-alpha and BL21.
· HEK293 cell lines were used for function tests and all relevant experiments were conducted in a BLS-2 lab with appropriate practices and containment facilities.
· Plasmids α2A-AR-CT and Venus-K-Ras are gifts from Dr. Xu, pGEX-4T-1 is provided by SubCat and other DNA materials were orderd from the company Genscript.
· Don't assume anything
· Take note of what others have given you
· Do not use reagents that do not belong to oneself without permission from others
· Don't litter
· Return the equipment after completing the experiment
· Place excess solute on an additional weighing paper and do not put it back into the original solute bottle
· Clean the spoon before changing solutes
· The balance needs to be peeled (zeroed) before each use with a weighing paper
· The lid of the solute bottle should be reversed on the desktop
· After using the Pipette, setting it into its maximum capacity
· To avoid pollution, hands should not touch the inside of the container walls
· hands should not be held on the outside of the container walls.
· When transferring liquid, check the range of the Single Channel Pipettors
· After using the solvent, put it back into the ice
· Press the piston to the bottom when adding liquid
· When adding solvent for the second time, place the needle below the liquid level
· Spray disinfectant alcohol before benchtop
· Unsterilized parts should not be inserted into a sterile environment (especially long-term items such as pipettes)
· When the liquid pipettor is used up, adjust the maximum range (according to the remarks on the gun body)
· You can add more (there are other substances in the solvent)
· Before using benchtop, you need to open the ventilation system
· Label all reagents